www.Leatherhouse.com, Sonnenwall 69, 47051 Duisburg, Germany
Tel: +49 203 518860-0, Fax: +49 203 518860-29
Stand: 28.04.2017

Tools 

Machine Inserts for Rivet Press, Manual Punching Tool and Universal Pliers

   

Retail Price
ImageDescriptionDetailsItem No.€ / 1
Rivet ToolJiffy / Rapid Rivet Tool
Upper Tool Flathead
Base Tool Rivet for hollow rivet shaft, for closed or capped bottoms use bottom caps.
thread 1/4 inch
base 12 mm
Head 4.8 mm7570218,50
Head 5.8 mm7570318,50
Head 6.8 mm7570418,50
Head 9.0 mm7570618,50
Head 11.0 mm7570818,50
Head 13.0 mm7571019,50
Rivet Tool
Rivet Hand PunchJiffy / Rapid Rivet Tool
Upper Tool Flathead
Base Tool Flathead
thread 1/4 inch / base 12 mm
Head 6.8 mm7570518,50
Head 9.0 mm7570718,50
Head 11.0 mm7570918,50
ImageDescriptionDetailedItem No. € / 1Satz
Grommet ToolGrommet/Eyelet Tool
Upper + Lower
Stamp Set

thread 1/4 inch / base 12 mm
4.4 mm Grommets/Eyelet7575119,90
5.5 mm Grommets/Eyelet7575219,90
6.7 mm Grommets/Eyelet7575319,90
8.0 mm Grommets/Eyelet7575420,90
10.0 mm Grommets/Eyelet7575522,90
11.0 mm Grommets/Eyelet7575624,90
14.0 mm Grommets/Eyelet7575826,90
16.0 mm Grommets/Eyelet7575929,90
Grommet Tool
Hole PunchOval Hole Punch
ex. cutting hole for buckle pins

thread 1/4 inch
12 x 3 mm7577049,00
16 x 3 mm7577152,00
20 x 4 mm7577259,00
20 x 5 mm7577358,00
ImageDescriptionDetailedItem No. € / 1pc.
Hole PunchHole Punch
for use with leather, imitition leather,
cardboard etc.

As bottom stamp use the baseplate
made of brass.

To punch holes
lay a scrap piece of
leather or cardboard under your project.

thread 1/4 inch
1.0 mm holes757809,90
1.5 mm holes757819,90
2.0 mm holes757826,90
2.5 mm holes757836,90
3.0 mm holes757846,90
3.5 mm holes757856,90
4.0 mm holes757866,90
5.0 mm holes757876,90
5.5 mm holes757886,90
6.0 mm holes757896,90
6.5 mm holes757908,90
7.0 mm holes757918,90
8.0 mm holes757939,90
9.0 mm holes757949,90
10.0 mm holes7579510,90
11.0 mm holes7579711,90
12.0 mm holes7579912,90
13.0 mm holes7580012,90
14.0 mm holes7580114,90
15.0 mm holes7580214,90
16.0 mm holes7580317,90
ImageDescriptionDetailedItem No. € / 1pc.
Hole PunchesRound Plate Bottom Stamp
standard, ex for use with Hole Punches or for capped rivet applications of hollow rivets, base 12 mm
24 mm , brass757696,90
Hole Punches
Hole PunchRound Plate Bottom Stamp
small, when little area within the project, base 12 mm
12 mm , brass

because of height not usable with Rivet Press 1
757685,90
Hole Punch
Snap ToolsSnap Setting Tool
4-part, for Spring Rings

thread 1/4 inch / base 12 mm
Head Size: 12.5 mm
annular spring: 7,5 mm
7581137,90
Head Size: 15.0 mm
annular spring: 10.0 mm
7581537,90
Snap Tools
Snap ToolsSnap Setting Tool
4-part, for S-springs

thread 1/4 inch / base 12 mm
Head Size: 12 mm7582337,90
Head Size: 14 mm7582537,90
Snap Tools
Rivet ToolJeans Button
Setting Tool

2-part

thread 1/4 inch / base 12 mm
Head Size: 15.0 mm7584247,90
Head Size: 17.0 mm7584347,90
Rivet Tool
Rivet ToolSetting Tool Hook for shoes
2-part

thread 1/4 inch / base 12 mm
model 921,
head size of hook: 8 mm
7583144,90
model 927,
head size of hook: 10 mm
7583244,90
ImageDescriptionDetailedItem No. € / 1Satz
Rivet ToolUpper + Bottom Stamp
for Self Piercing Rivets,
crimped

thread 1/4 inch / base 12 mm
Head 7,0 mm7572075,00
Head 9,0 mm7572175,00
Head 11,0 mm7572275,00
Rivet Tool
Rivet ToolUpper Stamp flat
use e.g. for chaton rivet

thread 1/4 inch
Head size 10 mm7572622,50
Head size 12 mm7572722,50
Rivet Tool
Rivet Press  InsertsUpper Stamp
for Machine Tubular Rivets, magnetic, movable,
highest quality

thread M6
Flathead 6.0 mm7573059,00
Flathead 7.0 mm7573159,00
Flathead 8.0 mm7573259,00
Flathead 9.0 mm7573359,00
Flathead 11.0 mm7573559,00
Roundhead 8.8 mm7573659,00
Rivet Press  Inserts
Rapid RivetsBottom Stamp
for Machine Rivets
highest quality

base 12 mm
crimped A for Jiffy Rivets7573859,00
Rapid Rivets
Rivet Hand PunchBottom Stamp
for Machine Rivets

base 12 mm
Cap Cone 8.0 mm7574259,00
Rivet Hand Punch
ImageDescriptionDetailedItem No. € / 1pc.
Rivet Tool
Grommet ToolHand Setting Tool
for Tool Dies
Handle with winding for Upper Stamp
Winding: 1/4 inch, also for Tools with M6 Winding
756307,90
Under Part Hand Setting Tool
for Under Stamp Tool Dies, Bore: 12 mm
7563128,90
Grommet Tool
Grommet ToolManuel Punch Set for Eyelets
4-part,
also applicable for
Mechanical Punch Presses
Eyelets with 4.4 mm 7563338,90
Eyelets with 5.5 mm7563438,90
Eyelets with 6.7 mm7563538,90
Eyelets with 8.0 mm7563638,90
Eyelets with 10.0 mm7563738,90
Eyelets with 11.0 mm7563838,90
ImageDescriptionDetailedItem No. € / 1Satz

Sizing winding of Upper Part, Lnge max. 10mm, wie bei den Werkzeugen im Original vorhanden, knnen Sie in ein Innengewinde schrauben von unserer Drehspindel oder in ein Innengewinde von Zoll. Wir empfehlen jedoch keine anderen Aufnahmen fr die Werkzeuge als die vom Lederhaus angebotenen Drehspindeln und Pressen.
Ja, wir wissen, die Steigung der Gewinde Metrisch und Zoll ist unterschiedlich !! Daher ist die vorgegeben Gewindelnge auch nur max. 10 mm. Auf dieser Lnge gleicht sich die unterschiedliche Steigung aus.